Modular Wiring Routing, Disconnecting And Connecting: Removing
-- Mount the front seat onto the fixture for seat repair. Refer to Front Seat, Mounting on Fixture for Seat Repair .
-- Unclip the rear bracket for the wire routing on the seat pan with a screwdriver.
-- Separate the cable holder -2- and -5- and cable tie -3- and -4-.
Tip
Depending on the equipment version, the number and position of the cable ties and cable holders may vary.
-- Remove the single wire from the protective cover -1-.
-- Replacing a faulty wire. Refer to WIRING HARNESSES AND CONNECTORS, REPAIRING .