Tail Lamp, Removing And Installing: Removing
-- Switch off the ignition. Place the vehicle key and other start authorization systems (such as smartphones) outside of the vehicle interior.
-- Turn the light switch off.
-- Position the screwdriver -1- on the opening and release the lower catch -arrow A-.
-- Grip between the cover -3- and the tail lamp -2- and release the remaining catches.
-- Carefully pull off the cover -3- -arrow B- that the guide and the hooks do not get damaged.
-- Remove the bolts -2- and -3-.
-- Carefully pivot the tail lamp -1- to the outside -arrow- and release from the clip nut on the outside.
-- Disconnect the connector.