Right And Left Led Headlamp Power Output Module 1 A27/A31, Removing And Installing: Removing
If the Right LED Headlamp Power Output Module 1 -A27- / Left LED Headlamp Power Output Module 1 -A31- is being replaced, then perform the test plan for replacing the control module:
-- Perform the "Control Module, Replacing" function using the Vehicle diagnostic tester . Refer to Diagnostic Entries .
Continuation
-- Switch off the ignition. Place the vehicle key and other start authorization systems (such as smartphones) outside of the vehicle interior.
-- Remove the bolts -arrows-.
-- Remove the power output module -1-.
-- Disconnect the connector -3- by pressing the locking mechanism -2-, tilting the retaining bracket -5- upward, and removing the connector.