Overview - Driver Side Airbag
- Wiring Harness
- For the Driver Airbag Igniter -N95- /Driver Airbag Release Valve Igniter -N490-
- Refer to Connector on Airbag, Removing and Installing .
- Steering Wheel
- Shown as an example
- Refer to Overview - Steering Wheel .
- Steering Column Electronics Control Module -J527-
- Refer to OVERVIEW - STEERING COLUMN SWITCH MODULE .
- Bolt
- Tightening specification. Refer to OVERVIEW - STEERING WHEEL .
- Driver Side Airbag
- Use a T15 Torx screwdriver to release, approximately 80 mm long
- Refer to Airbag Unit with Igniter, Removing and Installing .