Overview - Electric Drive Control Module On Rear Axle J1235

Fig 1: Exploded View Of Electric Drive Control Module on Rear Axle -J1235-

Courtesy of AUDI OF AMERICA, LLC

1. Cover for Connector Housing
   • Replace after removing
2. Bolt
   • Quantity: 16
   • Replace after removing
   • 5 Nm +30° diagonal sequence
3. Busbar
4. Bolt
   • For high-voltage cables
   • Quantity: 3
   • 8 Nm
5. Bolt
   • M8x25 mm
   • Quantity: 6
   • Replace after removing
   • 16 Nm +45°
6. Bolt
   • M8x50 mm
   • Replace after removing
   • 16 Nm +45°
7. Connector Housing
   • With sealing elements
   • For the Electric Drive Control Module on Rear Axle -J1235-
   • Removing and Installing. Refer to ELECTRIC DRIVE CONTROL MODULE ON REAR AXLE J1235, REMOVING AND INSTALLING .
   • Replace after removing
8. Coolant Line
   • To the rear motor
9. Bolt
   • Quantity: 4
   • 30 Nm
10. Dampers
11. Electric Drive Control Module on Rear Axle -J1235-
    • Refer to ELECTRIC DRIVE CONTROL MODULE ON REAR AXLE J1235, REMOVING AND INSTALLING 
12. Coolant Line
    • From the front coolant pipe
13. Separating Element
14. Bolt
    • Quantity: 3
    • 8 Nm
15. Bolt
    • M8x50 mm
    • Replace after removing
    • 16 Nm +45°
16. Bolt
    • For high-voltage cables
    • Quantity: 3
    • 8 Nm