Component Location Overview - Driving/Engine Sound

Courtesy of AUDI OF AMERICA, LLC

1. Engine Sound Generator Actuator 4 -R355-
   • Secured with the expanding rivet and nut
   • Refer to Engine Sound Generator Actuator, Removing and Installing (GM3)  .
   • Nut 8 Nm
2. Bracket for Engine Sound Generator Control Module 2 -J1167-
   • Secured with the expanding rivet and nut
   • Nut 3 Nm
3. Engine Sound Generator Control Module 2 -J1167-
   • Refer to Engine Sound Generator Control Module, Removing and Installing (GM4)  .
   • Refer to Engine Sound Generator Control Module, Removing and Installing (GM3)  .
   • Screw 4 Nm
4. Left Rear Midrange Speaker with Auxiliary Interior Speaker -R358- (GM3)
   • Refer to ENGINE SOUND GENERATOR INTERIOR SPEAKER, REMOVING AND INSTALLING (GM3) 
   • Screw 1.5 Nm
5. Engine Sound Generator Actuator 3 -R348-
   • Refer to Engine Sound Generator Actuator, Removing and Installing (GM4)  .
   • Refer to Engine Sound Generator Actuator, Removing and Installing (GM3)  .
   • Tightening specification and sequence. Refer to Fig 1.
6. Right Rear Midrange Speaker with Auxiliary Interior Speaker -R359-
   • Refer to RIGHT REAR MIDRANGE SPEAKER WITH AUXILIARY INTERIOR SPEAKER R359, REMOVING AND INSTALLING 
   • Screw 1.5 Nm
7. Engine Sound Generator Control Module 3 -J1177-
   • Refer to Engine Sound Generator Control Module, Removing and Installing (GM3)  .
   • Screw 4 Nm
8. Bracket for Engine Sound Generator Control Module 3 -J1177-
   • Secured with the expanding rivet and nut
   • Nut 8 Nm

Engine Sound Generator Actuator 3R348 - Tightening Specification and Sequence

Fig 1: Engine Sound Generator Actuator 3 -R348-

Courtesy of AUDI OF AMERICA, LLC