LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S8 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Cylinder Block 8-Cylinder Direct Injection 4.0L 4V TFSI Engine Ea825 >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> A/C Compressor Ribbed Belt, Removing And Installing >> Removing

A/C Compressor Ribbed Belt, Removing And Installing: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Audi S8: remove the upper left brace. Refer to Overview - Lock Carrier .

-- Loosen the hose clamp -2-, remove the air duct hose and push to the side.

GWWA21-11349Courtesy of AUDI OF AMERICA, LLC

All additional procedures are described. Refer to RIBBED BELT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals