Overview - Vacuum Pump, 2.0L TFSI Engine

Fig 1: Exploded View Of Vacuum Pump, Vehicles With 2.0L TFSI Engine

Courtesy of AUDI OF AMERICA, LLC

Vacuum Pump
- Removing and Installing. Refer to VACUUM PUMP, REMOVING AND INSTALLING .
Seal
- Always replace after removing
Vacuum Hose
- There are different versions. Refer to the Electronic Parts Information (ETKA) for the allocation.
Bolt
- Always replace after removing
- 8 Nm +180°
Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
Bolt
- 9 Nm
Bolt
- 9 Nm
Bolt
- Tightening specification. Refer to appropriate Multiport Fuel Injection article, High Pressure Pump; Overview - High Pressure Pump .
High Pressure Pump
- Removing and Installing. Refer to appropriate Multiport Fuel Injection article, High Pressure Pump; High Pressure Pump, Removing and Installing .
O-Ring
- Always replace after removing