DTC Memory, Erasing And Ending Output
Indicated on display
| Rapid data transfer HELP Selection function XX |
-- Press buttons 0 and 5 to select the "Erase DTC Memory" function 05.
Indicated on display
| Rapid data transfer Q 05 - Erase DTC Memory |
-- Press Q button to confirm input.
Indicated on display
| DTC Memory is not interrogated |
Follow the specified sequence exactly, i.e. check DTC memory before erasing.
DTC memory cannot be erased if, for example, the ignition is switched off between checking and erasing, or if the vehicle has exceeded 20 kp/h (12 mph).
Indicated on display
| Rapid data transfer DTC memory is erased |
-- Press → button.
Indicated on display
| Rapid data transfer HELP Selection function XX |
-- Press buttons 0 and 6 to select "End Output" function 05.
Indicated on display
| Rapid data transfer Q 06 - End Output |
-- Press Q button to confirm input.
Indicated on display
| Rapid data transfer HELP Output is ended |
-- Switch ignition off.
-- Disconnect scan tool :VAG1551 adapter cable.
-- Switch ignition on.
- ABS warning light -K47- must go out after a short time
-- Road test.
-- Increase speed to over 30 kp/h (18 mph) at least once.
- ABS warning light -K47- must not come on again