3. Transmission Range Indicator, Checking
WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Test step 3.1
- Engine is running.
-- Engage the positions "P", "R", "N", "D/S" and "+/-" one after the other.
The respective selector lever position must be significantly brighter than the other drive gear symbols.
Test step 3.2
- Engine is running.
-- Engage the "P" position to do so press the button -3-.
The P symbol in the button in the selector lever handle must light up in white as a function lamp.
The P symbol in the Selector Lever Transmission Range Display -Y5- -1- as a function lamp must be red.
In all other selector lever positions it must not be illuminated.