LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S6 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Controls, Housing 0CJ, 0CK, 0HL, 0DN, 0DP)) >> 34 Controls, Housing >> MECHATRONIC >> MECHATRONIC, Removing And Installing >> Removing

MECHATRONIC, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

The system is under pressure.

  • Deactivate the ATF pump and drain the hydraulic pressure reservoir before removing the transmission fluid pan!

-- Using the Vehicle Diagnostic Tester in the Transmission Control Module -J217- empty the ATF pressure reservoir and disable the Transmission Fluid Auxiliary Hydraulic Pump -V552-. Refer to ATF PUMP, DEACTIVATING AND DRAINING THE HYDRAULIC PUMP RESERVOIR .

-- Remove the subframe crossbrace. Refer to appropriate Service Information .

-- Remove the transmission fluid pan. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .

Refer to MECHATRONIC, REMOVING AND INSTALLING for all other procedures for the Mechatronic.

scientia non olet · About LEMON Manuals