ATF Level, Checking: Assembling

WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The ATF check and fill hole must be sealed off again before the ATF reaches 45 °C (113 °F).

-- Tighten the plug on the inspection and fill hole or close the plugs all the way. The ATF level test is now completed.

Tightening Specifications

Plug: Refer to -item 1- Drain and Plug => List Item:Plugs.
Refer to .
Refer to .