Camshaft Position Sensor -G40-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
All except Audi Q7/Q8:
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
Audi Q7/Q8:
Continuation for All Vehicles:
-- Disconnect the connector -3-.
-- Remove the bolt -1-, and remove the Camshaft Position Sensor -G40- -item 2-. (Shown with removed intake manifold.)