Assembly Mount Control Module -J931-, REMOVING AND INSTALLING, AUDI A6/A7: Removing
WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the left front wheel. Refer to WHEELS AND TIRES .
-- Loosen the rear area of the left front wheel housing liner and push toward the front. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Disconnect the connectors -4-.
-- Remove the bolts -1- and then remove the bracket -2- with the Assembly Mount Control Module -J931- -item 3-.
-- Release the retainers -arrows- and remove the control module.