Coolant Expansion Tank For Engine Coolant Circuit, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
Used coolant cannot be used again.

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Vehicles without high-voltage system, check the coolant level. Refer to COOLANT LEVEL, CHECKING AND FILLING .

-- Vehicles with high-voltage system, drain (refer to DRAIN THE COOLANT ) and fill the coolant for the engine coolant circuit. Refer to COOLANT, FILLING USING Cooling System Charge Kit:VAS 6096 [DMTA, DPAA, DPUA, DPVA, DMTC, DRYA, DUVA] .