Component Location Overview - Seals
WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Input Shaft Seal
- In clutch cover: replacing. Refer to INPUT SHAFT SEAL, REPLACING, CLUTCH COVER .
- In clutch housing: replacing. Refer to INPUT SHAFT SEAL, REPLACING, CLUTCH HOUSING .
- Transmission
- Left Flange Shaft Seal
- Replacing. Refer to LEFT SEAL, REPLACING .
- O-Ring
- Replace after removing
- Right Flange Shaft Seal
- Removing and Installing. Refer to RIGHT SEAL, REPLACING .
- Final Drive Cover
- Tightening specification and sequence. Refer to Figure.
- Transmission Output Shaft Seal
- Only for AWD vehicles
- Replacing. Refer to TRANSMISSION OUTPUT SHAFT SEAL, REPLACING .
- Parking Lock Shaft Seal
- Replacing. Refer to the appropriate service information .