Transmission Fluid Pan, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
TIP:
- Replace the seal and ATF pipe after removal.
- For vehicles with an aluminum transmission fluid pan, a plastic transmission fluid pan is available as a replacement part.
- During the conversion both the centering pins -arrow- must be removed from the transmission housing.
- At the same time pay attention that the sealing surface is not damaged.
-- Install the ATF cooler. Refer to ATF COOLER, REMOVING AND INSTALLING .
-- Fill the ATF. Refer to ATF, DRAINING AND FILLING .