Overview - Valve Body
WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Valve Body
- Removing and installing, Transmission Control Module - J217-. Refer to Transmission Control Module -J217-, REMOVING AND INSTALLING .
- Valve Unit Retainer
- Bolt
- Quantity: 8
- M4 X 35
- Replace after removing
- 2.5 Nm +60°
- Bleed Pipe
- Seal
- Replace after removing
- Seal
- Replace after removing
- Transmission Fluid Auxiliary Hydraulic Pump -V552- Motor
- Removing and Installing. Refer to Transmission Fluid Auxiliary Hydraulic Pump -V552-, REMOVING AND INSTALLING .
- Cover
- Bolt
- Quantity: 4
- M5 X 22
- Replace after removing
- 4 Nm + 45°
- Transmission Fluid Auxiliary Hydraulic Pump -V552- Pump
- Removing and Installing. Refer to Transmission Fluid Auxiliary Hydraulic Pump -V552-, REMOVING AND INSTALLING .
- Seal
- Replace after removing
- Seal
- Replace after removing