Overview - Balance Shaft

Fig 1: Exploded View Of Balance Shaft

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 40 Nm +45°
- Replace after removing
Gear
- With the chain sprocket for the camshaft timing chain
Bolt
- 9 Nm
Balance Shaft
- Removing and Installing. Refer to BALANCE SHAFT, REMOVING AND INSTALLING .
Roller Bearing
- Replacing. Refer to ROLLER BEARING, REPLACING .
Balance Weight
- Can only be placed on the balance shaft in one position
Bolt
- 40 Nm +90°
- Replace after removing
Roller Bearing
- Replacing. Refer to ROLLER BEARING, REPLACING .
Thrust Washer
Seal
- Replace after removing
Gear Carrier