Sealing Flange, Removing And Installing, Belt Pulley Side: Removing
-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .
-- Remove the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .
-- Disconnect the connector -3- and remove the Cylinder Head Coolant Valve -N489- from the bracket -2-.
-- Disconnect the connector -1-.
-- Remove the bolts -arrows- and tie up the bracket to the side.
All additional procedures are described under: SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .