A/C Compressor Ribbed Belt, Removing And Installing, 2.9L Engine With Radiator Removed: Installing

Install in the reverse order of removal while noting the following:

• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Position the ribbed belt. Refer to OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE .

-- Pivot the ribbed belt tensioner using the Torx Socket - T60: 40087  slightly clockwise and remove the Locking Pin: T10060A  .

-- To tension the ribbed belt release the tensioner.

-- Check whether the ribbed belt is routed correctly.

-- Start the engine and check the ribbed belt routing.