LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S6 Prestige >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger (Servicing - 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine) >> 21 Turbocharger, Supercharger >> Charge Air System >> Intake Manifold, Removing And Installing >> Intake Manifold, Removing And Installing, 2.9L Engine >> Removing

Intake Manifold, Removing And Installing, 2.9L Engine: Removing

-- Pay attention to the repair information. Refer to REPAIR INFORMATION .

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Audi A4/A5, Q5:

-- Loosen the hose clamp -right arrow-, and remove the air duct hose -1-.

Audi A6/A7

-- Remove the bolts -arrows-. Remove the air duct -1-.

-- Loosen the hose clamp -right arrow-, and remove the air duct hose -1-.

All:

-- Disconnect the connector and free up the wiring harness.

  1. For the Charge Air Cooler Temperature Sensor 2 -G764-
  2. For the Charge Air Cooler Temperature Sensor 1 -G763-

-- Remove the oil filter element (refer to ENGINE OIL ) and cover the opening with a clean cleaning cloth.

-- Remove the bolts -arrows-.

-- Remove the crankcase ventilation hose -2- by pressing the release buttons on both sides.

-- Free up the intake manifold -1-.

-- Remove the crankcase ventilation hose -arrows- by pressing the release buttons on both sides.

-- Remove the intake manifold.

scientia non olet · About LEMON Manuals