LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S6 Prestige >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger (Servicing - 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Temperature Sensor, Removing And Installing >> Removing

Charge Air Temperature Sensor, Removing And Installing: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the affected connector:

  1. For the Charge Air Cooler Temperature Sensor 2 -G764-
  2. For the Charge Air Cooler Temperature Sensor 1 -G763-

-- Remove the charge air temperature sensor.

scientia non olet · About LEMON Manuals