ELECTRICAL COMPRESSOR WITH Electric Compressor Control Module -J1123-, REMOVING AND INSTALLING: Installing
Install in the reverse order of removal while noting the following:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
- Check the vacuum hoses for damage before the assembly and replace if necessary.
CAUTION:
The electrical compressor can be damaged if the vacuum hose is loose, damaged, or blocked.
- Check the vacuum hose for the electrical compressor for damage and correct routing.
-- Install the left engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .
-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING, 2.9L ENGINE .
-- Install the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .
-- Follow all steps after connecting the battery. Refer to BATTERY A, DISCONNECTING AND CONNECTING, VEHICLES WITH HIGH-VOLTAGE SYSTEM, (0K3) .