Overview - Luggage Compartment Cover

Fig 1: Luggage Compartment Component Overview

Courtesy of AUDI OF AMERICA, LLC

Bolt
- thread cutting
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- Quantity: 2
- 0.35 Nm
Frame
Luggage Compartment Cover Handle
Luggage Compartment Cover
Bolt
- Quantity: 2
- 2.5 Nm
Bolt
- Quantity: 2
- 4.5 Nm
Rail
- Refer to LUGGAGE COMPARTMENT COVER DRIVE UNIT, REMOVING AND INSTALLING
Clip
- Remove any clips remaining in the D-pillar mounting points using the Omega Clip Tool:T40280 . To install, insert into the rail.
- Replace damaged or deformed clips
- Quantity: 2
Luggage Compartment Cover Carrier
- Clipped in the rail
- Quantity: 2
- Refer to D-Pillar Trim Panel, Removing and Installing .
Locking Pin
Rivet
- Quantity: 2
Luggage Compartment Cover Motor 1 -V473-
- Refer to LUGGAGE COMPARTMENT COVER DRIVE UNIT, REMOVING AND INSTALLING
Nut
- Quantity: 3
- 2.5 Nm