Roof Grab Handle, Removing And Installing: Removing

-- Insert the Angled Screwdriver:VAS 6543  -4- in the gap behind the expanding cap -2-.

Fig 1: Identifying Expanding Caps

Courtesy of AUDI OF AMERICA, LLC

Conditions

• Unclip the expanding cap only to the lock position.

-- Pivot the angled screwdriver -arrow-, until the expanding cap slides audibly into the lock position.

-- Repeat the procedure on the second expanding cap -3-.

-- Remove the roof grab handle -1- from the opening in the body.

-- Leave the expanding caps in the lock position in the roof grab handle.