Wheel, Balancing: Conditions
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Before beginning balancing, the following requirements must be fulfilled.
- The tire pressure must be OK.
- The tire tread must not be worn down on one side and should be at least 4 mm deep.
- The tires must not have any damage such as cuts, holes, foreign bodies, etc.
- The suspension and steering, including the shock absorber, must be in perfect condition.
- Tires may not have any flat spots from standing.
A Flat Spot from Standing Cannot be Balanced.