Overview - Sliding And Tilting Mechanism
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Cable
- For the slide and tilting mechanism
- Removing and Installing. Refer to SLIDING AND TILTING MECHANISM CABLE, REMOVING AND INSTALLING .
- Perform the adaptation after installing. Refer to Sunroof Motor -V1-, PROGRAMMING .
- Cable
- For sunroof shade
- Removing and Installing. Refer to SUNROOF SHADE CABLES, REMOVING AND INSTALLING .
- Perform the adaptation after installing. Refer to Sunroof Motor -V1-, PROGRAMMING .
- Inner Bracket
- For the cables
- Can only be removed when the cables are removed
- Sunroof Shade Driver
- Removing and Installing. Refer to SUNROOF SHADE, REMOVING AND INSTALLING .
- Bolt
- 5 Nm
- Glass Panel Tilting Rail
- Tilting Lever
- Bolt
- 5 Nm
- Operating Lever
- For the tilting lever
- Bolt
- 5 Nm
- Guide Rail
- For sliding and tilting mechanism and sunroof shade
- Removing and Installing. Refer to SLIDING AND TILTING MECHANISM, REMOVING AND INSTALLING .
- Outer Bracket
- A6: Removing and Installing. Refer to SLIDING AND TILTING MECHANISM, REMOVING AND INSTALLING .
- Bolt
- 5 Nm
- Sunroof Driver
- Removing and Installing. Refer to SLIDING AND TILTING MECHANISM CABLE, REMOVING AND INSTALLING .