Overview - Windshield Projection (Head-Up Display)
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Exterior Bracket
- Must not be removed
- Nut
- must not be loosened
- Quantity: 3
- Windshield Projection Head Up Display Control Module -J898-
- Refer to appropriate Repair Information .
- Bolt
- Quantity: 2
- Replace after removing
- Refer to Fig 2
- Expanding Rivet
- Air Duct
- Instrument Panel
- Clip
- Upper Cover
- Refer to OVERVIEW - INSTRUMENT PANEL .
- Expanding Rivet
- Bolt
- Refer to Fig 2
- Bolt
- Quantity: 2
- Replace after removing
- Refer to Fig 2
- Instrument Panel Crossmember
- Nut
- must not be loosened
- Quantity: 3
- Interior Bracket
- Must not be removed
Windshield Projection Head Up Display Control Module - Tightening Specification and Sequence
| Step | Bolts | Tightening Specification |
|---|---|---|
| 1. | -1- through -3- | Install all the way by hand |
| 2. | -1- | 5.5 Nm |
| 3. | -2- | 4 Nm |
| 4. | -3- | 4 Nm |