CUPHOLDER Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Unclip the clip release lever from the Scraper Set:VAS 6845
between the trim and the cover and the trim -1- -arrow A-.
Courtesy of AUDI OF AMERICA, LLC
|
-- Disengage the remaining frame.
-- Lift the trim -1- on the cupholder cover -arrow B- and remove.