Center Rear Seat Belt Guide, Removing And Installing, A6 AVANT, A7: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the center rear belt end fitting. Refer to REAR SEAT BELT LATCH, REMOVING AND INSTALLING .
-- Release the catches -1- by inserting a screwdriver from above through the hole in the belt guide.
-- At the same time, unclip the seat belt guide -2- using the Trim Removal Wedge:3409 -arrow-.
-- Thread the belt end fitting out and remove the seat belt guide -2-.