Outer Rear Belt End Fitting, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Conditions

If parts of the seat belt system are removed due to an accident, replace the belt system bolts.

-- Position the belt end fitting -2- so that the anti-twist mechanism -arrow- engages in the cut-out on the floor panel.

Courtesy of AUDI OF AMERICA, LLC