Front Seat Belt Guide, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the B-pillar trim panels and move to the side together with the seat belt webbing. Refer to B-Pillar Upper Trim Panel, Removing and Installing .
-- Move the front seat all the way to the front and into the highest position.
-- Remove the expanding rivets -A arrows-.
-- Unclip the wire on the air duct -B arrows-.
-- Push the carpet to the side and remove the air duct -1- upward -arrow C-.
-- Release the catches -arrows- one after the other and turn the seat belt guide -1- counter-clockwise at the same time.
-- Remove the seat belt guide -1- and the seat belt webbing.