Overview - Airbag Control Module
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Airbag Control Module -J234-
- The control module is grounded via the housing with the body.
- Refer to Airbag Control Module J234, Removing and Installing .
- Nut
- The thread must be paint and contaminant free, nut and ground pins serve as ground connection for the control module.
- Quantity: 4
- 9 Nm
- Nut
- Quantity: 2
- 4 Nm
- Cover
- Connector
- Connector