LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Windshield Wiper, Bringing Into Service Position

Windshield Wiper, Bringing Into Service Position

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
 
CAUTION:

Risk of damaging the front lid by moving the windshield wipers back to the basic setting.

- Never maneuver a vehicle with the windshield wiper arms folded up.

CAUTION:

Risk of damage by operating frozen wiper blades.

- Let the wiper blades defrost before operating.

 

Conditions

-- At freezing temperatures, check that the wiper blades are not frozen on the windshield.

-- Switch the ignition on.

-- Activate the windshield wiper "on" menu item using the multimedia system control head. Refer to the Owner's Manual.

Conditions

-- Switch off the ignition.

Tip

At a speed of 6 km/h (3.7 mph) (3.7 mph) or when operating the windshield wiper switch, move the windshield wipers back into the home position.