Rear Lid Remote Release Button E233, Removing And Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Open the clip -2-.

-- Push out the trim -1- with Rear Lid Remote Release Button -E233- from the door trim panel -arrow-.

-- Release the hooks -arrows- carefully with a small screwdriver.

Fig 1: Carefully Release Retaining Hooks

Courtesy of AUDI OF AMERICA, LLC

-- Remove the switch -1- toward the rear from the trim -2-.

Installing

Install in the reverse order of removal while noting the following:

-- Press in the trim with the switch until the hooks engage in the mount.