Rear Lid Control Head Ex58, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Release the clips Rear Lid Control Head -EX58- -1- -arrows-.
-- Remove the control head from the rear lid trim panel.
-- Disconnect the connector.
Tip
If the control head cannot be removed as described, then the rear lid lower trim panel must be removed. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .