Anti-Theft Alarm System Sensor G578, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
If the Anti-Theft Alarm System Sensor -G578- was replaced, complete the test plan for replacing the control module.
-- Complete the "control module, replacing" function using the => Vehicle Diagnostic Tester Vehicle Diagnostic Tester. Refer to Diagnostic Entries .