Lower Tail Lamp, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the scraper no. 3 from Scraper Set :VAS 6845 -1- as shown and disengage the retainers -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover -3- from the tail lamp -2-.

-- Remove the bolts -2- and -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Pivot the tail lamp -1- slightly to the outside -arrow-.

-- Loosen the tail lamp -1- from the outside toward the rear from the clip nut and remove rearward.

-- Disconnect the connector.