Steering Column Switch Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
If the control module is replaced, the test plan to replace the control module must be performed.
-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Remove the steering wheel. Refer to the appropriate service information .
-- Remove the steering column trim panels. Refer to OVERVIEW - STEERING COLUMN TRIM PANEL .
-- Remove the bolt -1-.
-- Disconnect the connector -2-.
-- Remove the steering column switch module -3-.