Right And Left Led Headlamp Power Output Module 1 A27/A31, Removing And Installing, Led Headlamp: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
If the Right LED Headlamp Power Output Module 1 -A27- /Left LED Headlamp Power Output Module 1 -A31- is being replaced, then perform the test plan for replacing the control module:
-- Perform the "control module, replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Remove the headlamp housing. Refer to Headlamp Housing, Removing and Installing .
-- Remove the bolts -arrows-.
-- Remove the power output module -5-.
-- Press the securing tab -3-.
-- Pivot the retaining bracket -2- upward.
-- Disconnect the connector -4-.