Left And Right Matrix Headlamp Power Output Module A44/A45, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Conditions
- Working with the ESD Work Surface :VAS 6613 . Refer to Repair Information .
- To protect against electrostatic discharge, the ESD Work Surface :VAS 6613 is designed to provide sufficient grounding.
-- Remove the headlamp. Refer to Headlamp Housing, Removing and Installing .
-- Remove the headlamp fan. Refer to Left and Right Headlamp Fan V407/V408, Removing and Installing .
-- Place the headlamp on the ESD work surface.
-- Disconnect the connectors -2- and -4-.
-- Release the retainer -arrow-.
-- Remove the power output module -3- from the mount -1-.