Led Module 1, Removing And Installing: Notes
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- ESD Work Surface :VAS 6613
Required aids
- Magnetic Screwdriver
- Safety Gloves
- Protective Eyewear
- Box cutter
Tip
The headlamp housing must be cut at the designated location with a sharp box cutter to replace the LED module.
Tip
A housing cover can be ordered to seal the installation opening. Refer to the Parts Information.