Headlamp Housing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the headlamp cover. Refer to OVERVIEW - PLENUM CHAMBER COVER .
Right side headlamp housing
-- Free up the washer fluid hose -1- for the headlamp washer system -arrows-.
-- Disconnect the washer fluid hose at the washer nozzle.
Continuation
-- Remove the bolts -arrows-.
-- Free up the breather hose -1-.
-- Pull the headlamp housing -2- forward slightly and disconnect the connector.
-- Remove the headlamp housing.