LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Exterior Lights, Switches) >> 94 Exterior Lights, Switches >> Headlamps >> Headlamp Housing Repair Kit, Installing, A6 >> Headlamp Housing Repair Kit, Installing

Headlamp Housing Repair Kit, Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Tip

Headlamp mounting tabs that have broken off can be replaced by installing the repair set. Completely replacing the headlamp is therefore not necessary.

Tip

There are different repair kits for the left and right headlamps.

Procedure 

 

-- Remove the headlamp with the broken mounting tab. Refer to Headlamp Housing, Removing and Installing  .

-- Remove the rest of the broken mounting tab on the headlamp housing.

 

-- Install the repair kit mounting tabs -3-, -4- and -5- on the headlamp housing -1- and secure with the bolts -2-.

GWWA94-12251Courtesy of AUDI OF AMERICA, LLC

-- Refer to HEADLAMP, ADJUSTING, LED HEADLAMP  / HEADLAMP, ADJUSTING, MATRIX LED HEADLAMPS  .

 

Tightening Specifications