Height, Adjusting Using Spring Element

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Adjustment dimensions. Refer to ADJUSTMENT DIMENSIONS .

Special tools and workshop equipment required

Gauge - Gap Adjustment :3371

Fig 1: Gap Adjustment Gauge (3371)
Courtesy of AUDI OF AMERICA, LLC

Procedure

Front bumper cover installed.
The spring element -5- must be tensioned.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolt -4- using a screwdriver -3-.

-- Adjust the distance between the radiator grille -1- and the hood -2-.

-- Tighten the bolt.

Tightening Specifications

Refer to OVERVIEW - LOCK CARRIER