Parking Lock Emergency Release Cable, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of accident due to the uncontrolled movement of the vehicle
With the motor running the uncontrolled movement of the vehicle can be possible if a selector lever position is engaged.
- Engage the parking brake.
-- Remove the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Remove the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
-- Free up the wiring harness -2-.
-- Remove the nuts -arrows- and lower the emergency release mount -1-.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Disconnect and lower the tunnel heat shield slightly. Refer to appropriate Repair Information .
-- Remove the bolts -arrows-.
-- Remove the front parking lock emergency release cable -1-.