Parking Lock Emergency Release Cable, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Make sure that the distance between the emergency release cable -2- and lever -1- is maintained.
- Dimension -a- = minimum 1 mm.
- Dimension -b- = minimum 1 mm.
-- Install tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
-- Check the parking lock emergency release. Refer to EMERGENCY RELEASE FROM P .