Drain and Plug
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- ATF Drain Plug
- Tighten all the way
- O-Ring
- Replace after removing
- Drain Plug
- 12 Nm
- Always replace
- For the transmission fluid inside the transfer case
- Plug
- 27 Nm
- Always replace
- For the inspection and fill hole
- For the transmission fluid inside the transfer case
- Plug
- 30 Nm
- Always replace
- For the ATF check and fill hole
- Plug
- 27 Nm
- For the inspection and fill hole
- For the gear oil inside the front final drive
- Drain Plug
- 10 Nm
- For the gear oil inside the front final drive