Cover And Cushion, Removing And Installing, Folding Backrest: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Flip the protective strip -1- over 180° toward the inside -arrow A-.

Courtesy of AUDI OF AMERICA, LLC

-- Engage the protective strip in the groove on the backrest frame -arrow B-.

After installing, make sure the cover is free of folds.